ModLight2
Jump to navigation
Jump to search
Description
modLight2 is our modLight module for BMW E38/E39/E53 and Range Rover L322
Instructions of use
Instructions manual: modLight2 manual
How to install modLight2 into your car?
You have to properly connect modLight2 to your car's wiring harness.
ModLight2 has 3-pin connector with BROWN, RED and YELLOW wires.
- The BROWN wire must be connected to GND (ground) of your car's wire harness.
- The RED wire must be connected to 12V (permanent) power source from your car's wire harness.
- The yellow wire must be connected to IBUS source (IBUS wire) from your car's wire harness.