Difference between revisions of "ModLight2"
Jump to navigation
Jump to search
(Created page with "== Description == modLight2 is our modLight module for BMW E38/E39/E53 and Range Rover L322 == Instructions of use == Instructions manual: [https://modbmw.com/manuals/modLigh...") |
|||
| Line 7: | Line 7: | ||
You have to properly connect modLight2 to your car's wiring harness.<br> | You have to properly connect modLight2 to your car's wiring harness.<br> | ||
ModLight2 has 3-pin connector with BROWN, RED and YELLOW wires.<br> | ModLight2 has 3-pin connector with BROWN, RED and YELLOW wires.<br> | ||
| − | * The BROWN wire must be connected to GND (ground) of your car's wire harness. | + | It's highly recommended to use multimeter to pre-check and confirm the power sources of your car's wire harness where you plan to connect modLight2 to.<br> |
| − | * The RED wire must be connected to 12V (permanent) power source from your car's wire harness. | + | * The BROWN wire must be connected to GND (ground) of your car's wire harness, which is usually a brown, brown-white or brown-black wire. |
| − | * The | + | * The RED wire must be connected to 12V (permanent) power source from your car's wire harness, which is usually red-green, red-blue or red-white wire. |
| + | * The YELLOW wire must be connected to IBUS source (IBUS wire) from your car's wire harness, which is always a white wire with gray stripe and yellow dots. | ||
Revision as of 22:16, 9 August 2020
Description
modLight2 is our modLight module for BMW E38/E39/E53 and Range Rover L322
Instructions of use
Instructions manual: modLight2 manual
How to install modLight2 into your car?
You have to properly connect modLight2 to your car's wiring harness.
ModLight2 has 3-pin connector with BROWN, RED and YELLOW wires.
It's highly recommended to use multimeter to pre-check and confirm the power sources of your car's wire harness where you plan to connect modLight2 to.
- The BROWN wire must be connected to GND (ground) of your car's wire harness, which is usually a brown, brown-white or brown-black wire.
- The RED wire must be connected to 12V (permanent) power source from your car's wire harness, which is usually red-green, red-blue or red-white wire.
- The YELLOW wire must be connected to IBUS source (IBUS wire) from your car's wire harness, which is always a white wire with gray stripe and yellow dots.
